le-pregao-712010: Using dkms to compile wireless module

Signed-off-by: Diego Pasqualin <dpasqualin@c3sl.ufpr.br>

.gitignore

+*deb

le-pregao-712010/VERSAO

-1.0.0
+1.0.6

le-pregao-712010/pacote/DEBIAN/control

 Package: le-pregao-712010
-Version: 0.0.12
+Priority: important
+Version:
 Maintainer: LE Maintainer <le-maintainer@c3sl.ufpr.br>
 Architecture: i386
 Section: main
-Priority: important
-Depends: linux-image-2.6.32-29-generic-pae
+Pre-Depends: dkms
 Description: Especific changes to make LE4.0 work on "Pregao 71/2010"

le-pregao-712010/pacote/DEBIAN/postinst

@@ -20,8 +20,35 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
 # USA.
 
-echo "Running depmod..."
-/sbin/depmod -a 2.6.32-29-generic-pae
+PACKAGE_NAME="lepregao712010"
+PACKAGE_VERSION="2.3.0.0-Alpha-v2"
+KERNEL_VERSION="$(uname -r)"
+
+# Put conflicting modules at /etc/modprobe.d/blacklist.conf 
+echo "# replaced by rt3562sta" >> /etc/modprobe.d/blacklist.conf
+echo "blacklist rt2800pci" >> /etc/modprobe.d/blacklist.conf
+
+# Function to set selections
+setselections() {
+    selfile=$1
+    # Wait until it works
+    while ! dpkg --set-selections < ${selfile} &>/dev/null ; do
+        sleep 1
+    done
+    rm -f ${selfile}
+}
+
+# Hold Kernel
+sels=$(mktemp)
+auxfile=$(mktemp)
+dpkg --get-selections \* > ${sels}
+awk '{if (($1 ~ /^linux-image-generic-pae/) || ($1 ~ /^linux-headers-generic-pae/)) {print $1"\thold"} else { print $0} }' ${sels} >\
+   ${auxfile}
+rm -f ${sels}
+setselections ${auxfile} & disown
+
+echo "Building module for all installed kernels using dkms..."
+/usr/lib/dkms/common.postinst $PACKAGE_NAME $PACKAGE_VERSION
 
 echo "Loading module rt3562sta"
 modprobe rt3562sta || true
@@ -33,4 +60,5 @@ echo "Restarting network interfaces"
 aa-complain cupsd
 /etc/init.d/cups start
 
+echo $KERNEL_VERSION > /var/log/le-oldkernelversion
 exit 0

le-pregao-712010/pacote/DEBIAN/postrm

@@ -20,6 +20,10 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
 # USA.
 
+# removing conflicting modules from blacklist
+sed -i s/'# replaced by rt3562sta'/''/ /etc/modprobe.d/blacklist.conf
+sed -i s/'blacklist rt2800pci'/''/ /etc/modprobe.d/blacklist.conf
+
 echo "Running depmod..."
 /sbin/depmod -a 2.6.32-29-generic-pae
 

le-pregao-712010/pacote/DEBIAN/prerm

@@ -20,7 +20,17 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
 # USA.
 
+PACKAGE_NAME="lepregao712010"
+PACKAGE_VERSION="2.3.0.0-Alpha-v2"
+
 echo "Unloading module rt3562sta"
 rmmod rt3562sta || true
 
+if test "$1" != "upgrade"; then
+    dkms uninstall -m $PACKAGE_NAME -v $PACKAGE_VERSION
+fi
+
+echo "Restarting network interfaces"
+/etc/init.d/networking restart || true
+
 exit 0

le-pregao-712010/pacote/etc/init.d/pregao71

+#! /bin/sh
+
+
+if dpkg -l le-pregao-712010 | grep -q ^ii; then
+	if test -f "/var/log/le-oldkernelversion"; then
+		# if we know old kernel version
+		old_version=$(cat "/var/log/le-oldkernelversion")
+		actual_version=$(uname -r)
+		if test ${old_version} != ${actual_version}; then
+			# if kernel was upgraded
+			/usr/lib/dkms/common.postinst lepregao712010 2.3.0.0-Alpha-v2
+		fi
+	else
+		# if we don't know old kernel version
+		/usr/lib/dkms/common.postinst lepregao712010 2.3.0.0-Alpha-v2
+	fi
+	# set kernel version for next upgrade
+	uname -r > "/var/log/le-oldkernelversion"
+
+    # if modprobe fail, will not have problem, this mean that
+    # the driver is already on kernel (I hope)
+    #test -n "`cat /proc/modules | grep rt3562sta`" && rmmod rt3562sta
+	modprobe rt3562sta
+fi
+
+# Verify if the kernel is in hold state
+if test $(dpkg --get-selections | grep linux-image-generic-pae | tr -s [:blank:] | cut -f2) != "hold"; then
+    echo "linux-image-generic-pae hold" | dpkg --set-selections
+    echo "linux-headers-generic-pae hold" | dpkg --set-selections
+fi

le-pregao-712010/pacote/etc/rc1.d/S99pregao71

+../init.d/pregao71
\ No newline at end of file

le-pregao-712010/pacote/etc/rc2.d/S99pregao71

+../init.d/pregao71
\ No newline at end of file

le-pregao-712010/pacote/etc/rc3.d/S99pregao71

+../init.d/pregao71
\ No newline at end of file

le-pregao-712010/pacote/etc/rc4.d/S99pregao71

+../init.d/pregao71
\ No newline at end of file

le-pregao-712010/pacote/etc/rc5.d/S99pregao71

+../init.d/pregao71
\ No newline at end of file

le-pregao-712010/pacote/usr/src/lepregao712010-2.3.0.0-Alpha-v2/LICENSE ralink-firmware.txt

+Copyright (c) 2009, Ralink Technology Corporation 
+All rights reserved.
+
+Redistribution.  Redistribution and use in binary form, without 
+modification, are permitted provided that the following conditions are 
+met:
+
+* Redistributions must reproduce the above copyright notice and the 
+  following disclaimer in the documentation and/or other materials 
+  provided with the distribution. 
+* Neither the name of Ralink Technology Corporation nor the names of its
+  suppliers may be used to endorse or promote products derived from this
+  software without specific prior written permission. 
+* No reverse engineering, decompilation, or disassembly of this software 
+  is permitted.
+
+Limited patent license. Ralink Technology Corporation grants a world-wide, 
+royalty-free, non-exclusive license under patents it now or hereafter 
+owns or controls to make, have made, use, import, offer to sell and 
+sell ("Utilize") this software, but solely to the extent that any 
+such patent is necessary to Utilize the software alone, or in 
+combination with an operating system licensed under an approved Open 
+Source license as listed by the Open Source Initiative at 
+http://opensource.org/licenses.  The patent license shall not apply to 
+any other combinations which include this software.  No hardware per 
+se is licensed hereunder.
+
+DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, 
+BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
+COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
+OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 
+TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
+DAMAGE.

le-pregao-712010/pacote/usr/src/lepregao712010-2.3.0.0-Alpha-v2/Makefile

+RT28xx_MODE = STA
+TARGET = LINUX
+CHIPSET = 3562
+OSABL = NO
+
+#RT28xx_DIR = home directory of RT28xx source code
+RT28xx_DIR = $(shell pwd)
+RTMP_SRC_DIR = $(RT28xx_DIR)/RT$(CHIPSET)
+
+#PLATFORM: Target platform
+PLATFORM = PC
+#PLATFORM = 5VT
+#PLATFORM = IKANOS_V160
+#PLATFORM = IKANOS_V180
+#PLATFORM = SIGMA
+#PLATFORM = SIGMA_8622
+#PLATFORM = INIC
+#PLATFORM = STAR
+#PLATFORM = IXP
+#PLATFORM = INF_TWINPASS
+#PLATFORM = INF_DANUBE
+#PLATFORM = INF_AR9
+#PLATFORM = BRCM_6358
+#PLATFORM = INF_AMAZON_SE
+#PLATFORM = CAVM_OCTEON
+#PLATFORM = CMPC
+#PLATFORM = RALINK_2880
+#PLATFORM = RALINK_3052
+#PLATFORM = SMDK
+#PLATFORM = KODAK_DC
+#PLATFORM = DM6446
+#PLATFORM = FREESCALE8377
+
+
+ifeq ($(TARGET),LINUX)
+MAKE = make
+endif
+
+ifeq ($(PLATFORM),5VT)
+LINUX_SRC = /project/stable/5vt/ralink-2860-sdk/linux-2.6.17
+CROSS_COMPILE = /opt/crosstool/uClibc_v5te_le_gcc_4_1_1/bin/arm-linux-
+endif
+
+ifeq ($(PLATFORM),IKANOS_V160)
+LINUX_SRC = /home/sample/projects/LX_2618_RG_5_3_00r4_SRC/linux-2.6.18
+CROSS_COMPILE = mips-linux-
+endif
+
+ifeq ($(PLATFORM),IKANOS_V180)
+LINUX_SRC = /home/sample/projects/LX_BSP_VX180_5_4_0r1_ALPHA_26DEC07/linux-2.6.18
+CROSS_COMPILE = mips-linux-
+endif
+
+ifeq ($(PLATFORM),SIGMA)
+LINUX_SRC = /root/sigma/smp86xx_kernel_source_2.7.172.0/linux-2.6.15
+CROSS_COMPILE = /root/sigma/smp86xx_toolchain_2.7.172.0/build_mipsel_nofpu/staging_dir/bin/mipsel-linux-
+endif
+
+ifeq ($(PLATFORM),SIGMA_8622)
+LINUX_SRC = /home/snowpin/armutils_2.5.120.1/build_arm/linux-2.4.22-em86xx
+CROSS_COMPILE = /home/snowpin/armutils_2.5.120.1/toolchain/bin/arm-elf-
+CROSS_COMPILE_INCLUDE = /home/snowpin/armutils_2.5.120.1/toolchain/lib/gcc-lib/arm-elf/2.95.3
+endif
+
+ifeq ($(PLATFORM),STAR)
+LINUX_SRC = /opt/star/kernel/linux-2.4.27-star
+CROSS_COMPILE = /opt/star/tools/arm-linux/bin/arm-linux-
+endif
+
+ifeq ($(PLATFORM), RALINK_2880)
+LINUX_SRC = /project/stable/RT288x/RT288x_SDK/source/linux-2.4.x
+CROSS_COMPILE = /opt/buildroot-gdb/bin/mipsel-linux-
+endif
+
+ifeq ($(PLATFORM),RALINK_3052)
+LINUX_SRC = /home/peter/ap_soc/SDK_3_3_0_0/RT288x_SDK/source/linux-2.6.21.x
+CROSS_COMPILE = /opt/buildroot-gcc342/bin/mipsel-linux-uclibc-
+endif
+
+ifeq ($(PLATFORM),FREESCALE8377)
+LINUX_SRC = /opt/ltib-mpc8377_rds-20090309/rpm/BUILD/linux-2.6.25 
+CROSS_COMPILE = /opt/freescale/usr/local/gcc-4.2.187-eglibc-2.5.187/powerpc-linux-gnu/bin/powerpc-linux-gnu-
+endif
+
+ifeq ($(PLATFORM),PC)
+# Linux 2.6
+LINUX_SRC = /lib/modules/$(shell uname -r)/build
+# Linux 2.4 Change to your local setting
+#LINUX_SRC = /usr/src/linux-2.4
+LINUX_SRC_MODULE = /lib/modules/$(shell uname -r)/kernel/drivers/net/wireless/
+CROSS_COMPILE = 
+endif
+
+ifeq ($(PLATFORM),IXP)
+LINUX_SRC = /project/stable/Gmtek/snapgear-uclibc/linux-2.6.x
+CROSS_COMPILE = arm-linux-
+endif
+
+ifeq ($(PLATFORM),INF_TWINPASS)
+# Linux 2.6
+#LINUX_SRC = /lib/modules/$(shell uname -r)/build
+# Linux 2.4 Change to your local setting
+LINUX_SRC = /project/stable/twinpass/release/2.0.1/source/kernel/opensource/linux-2.4.31/
+CROSS_COMPILE = mips-linux-
+endif
+
+ifeq ($(PLATFORM),INF_DANUBE)
+LINUX_SRC = /opt/danube/sdk/linux-2.6.16.x
+CROSS_COMPILE = mips-linux-
+ROOTDIR = /opt/danube/sdk
+export ROOTDIR
+endif
+
+ifeq ($(PLATFORM),INF_AR9)
+LINUX_SRC = /root/ar9/xR9_BSP1.2.2.0/source/kernel/opensource/linux-2.6.20/
+CROSS_COMPILE = /root/ar9/ifx-lxdb26-1.0.2/gcc-3.4.4/toolchain-mips/bin/
+endif
+
+ifeq ($(PLATFORM),BRCM_6358)
+LINUX_SRC = 
+CROSS_COMPILE = 
+endif
+
+ifeq ($(PLATFORM),INF_AMAZON_SE)
+# Linux 2.6
+#LINUX_SRC = /lib/modules/$(shell uname -r)/build
+# Linux 2.4 Change to your local setting
+LINUX_SRC = /backup/ifx/3.6.2.2/source/kernel/opensource/linux-2.4.31
+#CROSS_COMPILE = mips-linux-
+#LINUX_SRC = /project/Infineon/3.6.2.2/source/kernel/opensource/linux-2.4.31
+CROSS_COMPILE = /opt/uclibc-toolchain/ifx-lxdb-1-2-3-external/gcc-3.3.6/toolchain-mips/R0208V35/mips-linux-uclibc/bin/
+endif
+
+ifeq ($(PLATFORM),ST)
+LINUX_SRC = /opt/STM/STLinux-2.2/devkit/sources/kernel/linux0039
+CROSS_COMPILE = /opt/STM/STLinux-2.2/devkit/sh4/bin/sh4-linux-
+ARCH := sh
+export ARCH
+endif
+
+ifeq ($(PLATFORM),CAVM_OCTEON)
+OCTEON_ROOT = /usr/local/Cavium_Networks/OCTEON-SDK
+LINUX_SRC = $(OCTEON_ROOT)/linux/kernel_2.6/linux
+CROSS_COMPILE = mips64-octeon-linux-gnu-
+endif
+
+ifeq ($(PLATFORM),CMPC)
+LINUX_SRC = /opt/fvt_11N_SDK_0807/fvt131x_SDK_11n/linux-2.6.17
+CROSS_COMPILE =
+endif
+
+ifeq ($(PLATFORM),SMDK)
+LINUX_SRC = /home/bhushan/itcenter/may28/linux-2.6-samsung
+CROSS_COMPILE = /usr/local/arm/4.2.2-eabi/usr/bin/arm-linux-
+endif
+
+ifeq ($(PLATFORM),KODAK_DC)
+SKD_SRC = C:/SigmaTel/DC1250_SDK_v1-9/sdk
+CROSS_COMPILE = $(cc)
+endif
+
+ifeq ($(PLATFORM),DM6446)
+LINUX_SRC = /home/fonchi/work/soc/ti-davinci
+endif
+
+export OSABL RT28xx_DIR RT28xx_MODE LINUX_SRC CROSS_COMPILE CROSS_COMPILE_INCLUDE PLATFORM RELEASE CHIPSET RTMP_SRC_DIR LINUX_SRC_MODULE TARGET
+
+all: build_tools $(TARGET)
+
+
+build_tools:
+	$(MAKE) -C tools
+	$(RT28xx_DIR)/tools/bin2h
+
+test:
+	$(MAKE) -C tools test
+
+LINUX:
+ifneq (,$(findstring 2.4,$(LINUX_SRC)))
+
+	cp -f os/linux/Makefile.4 $(RT28xx_DIR)/os/linux/Makefile
+	$(MAKE) -C $(RT28xx_DIR)/os/linux/
+
+#	cp -f $(RT28xx_DIR)/os/linux/rt$(CHIPSET)sta.o /tftpboot
+else
+	cp -f os/linux/Makefile.6 $(RT28xx_DIR)/os/linux/Makefile
+ifeq ($(PLATFORM),DM6446)
+	$(MAKE)  ARCH=arm CROSS_COMPILE=arm_v5t_le- -C  $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
+else
+ifeq ($(PLATFORM),FREESCALE8377)
+	$(MAKE) ARCH=powerpc CROSS_COMPILE=$(CROSS_COMPILE) -C  $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
+else
+	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
+endif
+endif
+
+endif	
+
+clean:
+ifeq ($(TARGET), LINUX)
+ifneq (,$(findstring 2.4,$(LINUX_SRC)))
+	cp -f os/linux/Makefile.4 os/linux/Makefile
+else
+	cp -f os/linux/Makefile.6 os/linux/Makefile
+endif
+	$(MAKE) -C os/linux clean
+	rm -rf os/linux/Makefile
+endif	
+
+uninstall:
+ifeq ($(TARGET), LINUX)
+ifneq (,$(findstring 2.4,$(LINUX_SRC)))
+	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.4 uninstall
+else
+	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.6 uninstall
+endif
+endif
+
+install:
+ifeq ($(TARGET), LINUX)
+ifneq (,$(findstring 2.4,$(LINUX_SRC)))
+	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.4 install
+else
+	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.6 install
+endif
+endif
+

le-pregao-712010/pacote/usr/src/lepregao712010-2.3.0.0-Alpha-v2/README_STA

+* README
+*
+* Ralink Tech Inc.
+* 
+* http://www.ralinktech.com
+*
+
+=======================================================================
+ModelName:
+===========
+RT2860 Wireless Lan Linux Driver
+
+
+=======================================================================
+Driver lName:
+=============
+rt3562sta.o/rt3562sta.ko
+
+
+=======================================================================
+Supporting Kernel:
+===================
+linux kernel 2.4 and 2.6 series. 
+Tested in Redhat 7.3 or later.
+
+
+=======================================================================
+Ralink Hardware:
+===================
+Ralink 802.11n Wireless LAN Card.
+
+
+=======================================================================
+Description:
+=============
+This is a linux device driver for Ralink RT3562/RT3062/RT2860 PCI ABGN WLAN Card.
+
+
+=======================================================================
+Contents:
+=============
+Makefile	        : Makefile
+*.c					: c files
+*.h					: header files
+
+
+=======================================================================
+Features:
+==========
+   This driver implements basic IEEE802.11. Infrastructure and adhoc mode with 
+   open or shared or WPA-PSK or WPA2-PSK authentication method. 
+   NONE, WEP, TKIP and AES encryption. 
+
+
+=======================================================================
+Build Instructions:  
+====================
+
+1> $tar -xvzf RT3562_Linux_STA_x.x.x.x.tgz
+    go to "./RT3562_Linux_STA_x.x.x.x" directory.
+    
+2> In Makefile
+	 set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
+	 define the linux kernel source include file path LINUX_SRC
+	 modify to meet your need.
+
+3> In os/linux/config.mk 
+	define the GCC and LD of the target machine
+	define the compiler flags CFLAGS
+	modify to meet your need.
+	** Build for being controlled by NetworkManager or wpa_supplicant wext functions
+	   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
+	   => #>cd wpa_supplicant-x.x
+	   => #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
+	** Build for being controlled by WpaSupplicant with Ralink Driver
+	   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
+	   => #>cd wpa_supplicant-0.5.7
+	   => #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
+
+4> $make			
+	# compile driver source code
+	# To fix "error: too few arguments to function iwe_stream_add_event"
+	  => $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
+
+5> $cp RT2860STA.dat  /etc/Wireless/RT2860STA/RT2860STA.dat       
+    
+6> load driver, go to "os/linux/" directory.
+    #[kernel 2.4]
+    #    $/sbin/insmod rt3562sta.o
+    #    $/sbin/ifconfig ra0 inet YOUR_IP up
+        
+    #[kernel 2.6]
+    #    $/sbin/insmod rt3562sta.ko
+    #    $/sbin/ifconfig ra0 inet YOUR_IP up
+
+7> unload driver    
+    $/sbin/ifconfig ra0 down
+	$/sbin/rmmod rt3562sta
+	
+=======================================================================
+CONFIGURATION:  
+====================
+RT2860 driver can be configured via following interfaces, 
+i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file
+
+i)  iwconfig comes with kernel.  
+ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
+iii)modify configuration file "RT2860STA.dat" in /etc/Wireless/RT2860STA/RT2860STA.dat.
+           
+Configuration File : RT2860STA.dat
+---------------------------------------
+# Copy this file to /etc/Wireless/RT2860STA/RT2860STA.dat
+# This file is a binary file and will be read on loading rt.o module.
+#
+# Use "vi RT2860STA.dat" to modify settings according to your need.
+# 
+# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
+# 2.) set Channel to "0" for auto-select on Infrastructure mode
+# 3.) set SSID for connecting to your Accss-point.
+# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
+# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
+# for more information refer to the Readme file.
+# 
+#The word of "Default" must not be removed
+Default
+CountryRegion=5
+CountryRegionABand=7
+CountryCode=
+SSID=Dennis2860AP
+NetworkType=Infra
+WirelessMode=9
+Channel=0
+BeaconPeriod=100
+TxPower=100
+BGProtection=0
+TxPreamble=0
+RTSThreshold=2347
+FragThreshold=2346
+TxBurst=1
+WmmCapable=0
+AckPolicy=0;0;0;0
+AuthMode=OPEN
+EncrypType=NONE
+WPAPSK=
+DefaultKeyID=1
+Key1Type=0
+Key1Str=
+Key2Type=0
+Key2Str=
+Key3Type=0
+Key3Str=
+Key4Type=0
+Key4Str=
+PSMode=CAM
+FastRoaming=0
+RoamThreshold=70
+HT_RDG=1
+HT_EXTCHA=0
+HT_OpMode=1
+HT_MpduDensity=4
+HT_BW=1
+HT_AutoBA=1
+HT_BADecline=0
+HT_AMSDU=0
+HT_BAWinSize=64
+HT_GI=1
+HT_MCS=33
+HT_MIMOPSMode=3
+IEEE80211H=0
+TGnWifiTest=0
+WirelessEvent=0
+CarrierDetect=0
+
+-----------------------------------------------
+*NOTE:
+	WMM parameters
+			WmmCapable			Set it as 1 to turn on WMM Qos support				
+			AckPolicy1~4		Ack policy which support normal Ack or no Ack
+								(AC_BK, AC_BE, AC_VI, AC_VO)		
+	
+	All WMM parameters do not support iwpriv command but WmmCapable, 
+	please store all parameter to RT2860STA.dat, and restart driver. 	
+
+-----------------------------------------------
+syntax is 'Param'='Value' and describes below. 
+
+@> CountryRegion=value                                 
+	value
+		0: use 1 ~ 11 Channel
+		1: use 1 ~ 13 Channel
+		2: use 10 ~ 11 Channel
+		3: use 10 ~ 13 Channel
+		4: use 14 Channel
+		5: use 1 ~ 14 Channel
+		6: use 3 ~ 9 Channel
+		7: use 5 ~ 13 Channel
+	   31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
+   	 	                                      
+@> CountryRegionABand=value      							
+	value	
+		0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
+		1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
+		2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
+		3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
+		4: use 149, 153, 157, 161, 165 Channel
+		5: use 149, 153, 157, 161 Channel
+		6: use 36, 40, 44, 48 Channel
+		7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
+		8: use 52, 56, 60, 64 Channel
+		9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
+	   10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
+	   11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel
+
+@> CountryCode=value
+	value
+		AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE, 
+		GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
+		PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
+		"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
+                                                           
+@> SSID=value                	
+	value
+		0~z, 1~32 ascii characters.
+                    	
+@> WirelessMode=value
+	value	
+		0: legacy 11b/g mixed 
+		1: legacy 11B only 
+		2: legacy 11A only         //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
+		3: legacy 11a/b/g mixed     //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
+		4: legacy 11G only
+		5: 11ABGN mixed
+		6: 11N only
+		7: 11GN mixed
+		8: 11AN mixed
+		9: 11BGN mixed
+	   10: 11AGN mixed	
+                     
+@> Channel=value
+	value
+		depends on CountryRegion or CountryRegionABand
+                    	
+@> BGProtection=value
+	value
+		0: Auto 
+		1: Always on 
+		2: Always off
+                    	
+@> TxPreamble=value
+  	value
+		0:Preamble Long
+		1:Preamble Short 
+		2:Auto
+                    	
+@> RTSThreshold=value
+	value
+		1~2347                                                       
+                    	                                       
+@> FragThreshold=value
+	value       	
+		256~2346
+                    	
+@> TxBurst=value
+	value
+		0: Disable
+		1: Enable
+
+@> NetworkType=value	    		
+	value 
+		Infra: infrastructure mode
+       	Adhoc: adhoc mode
+                                                                                                                                                        	                                                          
+@> AuthMode=value
+	value
+		OPEN	 	For open system	
+		SHARED	  	For shared key system	
+		WEPAUTO     Auto switch between OPEN and SHARED
+		WPAPSK      For WPA pre-shared key  (Infra)
+		WPA2PSK     For WPA2 pre-shared key (Infra)
+		WPANONE		For WPA pre-shared key  (Adhoc)
+		WPA         Use WPA-Supplicant
+		WPA2        Use WPA-Supplicant
+
+@> EncrypType=value
+	value
+		NONE		For AuthMode=OPEN                    
+		WEP			For AuthMode=OPEN or AuthMode=SHARED 
+		TKIP		For AuthMode=WPAPSK or WPA2PSK                    
+		AES			For AuthMode=WPAPSK or WPA2PSK                     
+		
+@> DefaultKeyID=value
+	value
+		1~4
+
+@> Key1=value
+    Key2=value
+    Key3=value
+    Key4=value
+	value
+		10 or 26 hexadecimal characters eg: 012345678
+        5 or 13 ascii characters eg: passd
+    (usage : "iwpriv" only)     
+
+@> Key1Type=vaule
+    Key2Type=value
+    Key3Type=vaule
+    Key4Type=vaule
+    value
+		0   hexadecimal type
+		1   assic type
+    (usage : reading profile only)
+
+@> Key1Str=value
+    Key2Str=value
+    Key3Str=vaule
+    Key4Str=vaule
+    value
+		10 or 26 characters (key type=0)
+		5 or 13 characters  (key type=1)
+    (usage : reading profile only)	
+
+@> WPAPSK=value              	
+	value
+		8~63 ASCII  		or 
+		64 HEX characters
+																                    																		
+@> WmmCapable=value
+	value
+		0: Disable WMM
+		1: Enable WMM
+        
+@> PSMode=value
+    value
+    	CAM			    Constantly Awake Mode
+		Max_PSP		    Max Power Savings
+		Fast_PSP		Power Save Mode
+
+@> FastRoaming=value
+	value
+		0				Disabled
+		1				Enabled
+
+@> RoamThreshold=value
+	value
+		Positive Interger(dBm)
+
+@> HT_RDG=value
+	value
+		0				Disabled
+		1				Enabled
+
+@> HT_EXTCHA=value (Extended Channel Switch Announcement)
+	value
+		0				Below
+		1 				Above
+
+@> HT_OpMode=value
+	value
+		0				HT mixed format
+		1				HT greenfield format
+
+@> HT_MpduDensity=value
+	value (based on 802.11n D2.0)
+		0: no restriction
+		1: 1/4 gs
+		2: 1/2 gs
+		3: 1 gs
+		4: 2 gs
+		5: 4 gs
+		6: 8 gs
+		7: 16 gs
+
+@> HT_BW=value
+	value
+		0				20MHz
+		1				40MHz
+
+@> HT_AutoBA=value
+	value
+		0				Disabled
+		1				Enabled
+
+@> HT_BADecline
+	value
+		0				Disabled
+		1			    Enabled <Reject BA request from AP>
+
+@> HT_AMSDU=value
+	value
+		0				Disabled
+		1				Enabled
+
+@> HT_BAWinSize=value
+	value
+		1 ~ 64
+
+@> HT_GI=value
+	value
+		0				long GI
+		1				short GI
+
+@> HT_MCS=value
+	value
+		0 ~ 15
+		33: auto
+
+@> HT_MIMOPSMode=value
+	value (based on 802.11n D2.0)
+		0				Static SM Power Save Mode
+		1				Dynamic SM Power Save Mode
+		2				Reserved
+		3				SM enabled
+	(not fully support yet)
+
+@> IEEE80211H=value
+	value
+		0				Disabled
+		1				Enabled
+
+@> TGnWifiTest=value
+	value
+		0				Disabled
+		1				Enabled
+
+@> WirelessEvent=value
+	value
+		0				Disabled
+		1				Enabled <send custom wireless event>
+	    
+@> CarrierDetect=value
+	value
+		0				Disabled
+		1				Enabled
+
+MORE INFORMATION
+=================================================================================
+If you want for rt2860 driver to auto-load at boot time:
+A) choose ra0 for first RT2860 WLAN card, ra1 for second RT2860 WLAN card, etc.
+   
+B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,      
+   edit( or add the line) in /etc/modules.conf:
+       alias ra0 rt2860sta
+   
+C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0  
+   DEVICE='ra0'
+   ONBOOT='yes'     
+
+
+NOTE:
+   if you use dhcp, add this line too .
+    BOOTPROTO='dhcp'
+
+*D) To ease the Default Gateway setting, 
+    add the line
+    GATEWAY=x.x.x.x   
+    in /etc/sysconfig/network

le-pregao-712010/pacote/usr/src/lepregao712010-2.3.0.0-Alpha-v2/RT3060STA.dat

+#The word of "Default" must not be removed
+Default
+CountryRegion=5
+CountryRegionABand=7
+CountryCode=
+ChannelGeography=1
+SSID=Dennis2860AP
+NetworkType=Infra
+WirelessMode=5
+Channel=0
+BeaconPeriod=100
+TxPower=100
+BGProtection=0
+TxPreamble=0
+RTSThreshold=2347
+FragThreshold=2346
+TxBurst=1
+PktAggregate=0
+WmmCapable=1
+AckPolicy=0;0;0;0
+AuthMode=OPEN
+EncrypType=NONE
+WPAPSK=
+DefaultKeyID=1
+Key1Type=0
+Key1Str=
+Key2Type=0
+Key2Str=
+Key3Type=0
+Key3Str=
+Key4Type=0
+Key4Str=
+PSMode=CAM
+AutoRoaming=0
+RoamThreshold=70
+APSDCapable=0
+APSDAC=0;0;0;0
+HT_RDG=1
+HT_EXTCHA=0
+HT_OpMode=0
+HT_MpduDensity=4
+HT_BW=1
+HT_AutoBA=1
+HT_BADecline=0
+HT_AMSDU=0
+HT_BAWinSize=64
+HT_GI=1
+HT_MCS=33
+HT_MIMOPSMode=3
+HT_DisallowTKIP=1
+HT_STBC=0
+IEEE80211H=0
+TGnWifiTest=0
+WirelessEvent=0
+CarrierDetect=0
+AntDiversity=0
+BeaconLostTime=4
+PSP_XLINK_MODE=0

le-pregao-712010/pacote/usr/src/lepregao712010-2.3.0.0-Alpha-v2/RT3060STACard.dat

+#The word of "Default" must not be removed, maximum 32 cards, 00 ~ 31
+Default
+
+#CARDID, MAC, CARDTYPE
+SELECT=CARDTYPE
+
+00CARDID=/etc/Wireless/RT2860STA/RT2860STA1.dat
+01CARDID=/etc/Wireless/RT2860STA/RT2860STA2.dat
+02CARDID=/etc/Wireless/RT2860STA/RT2860STA3.dat
+
+00MAC00:0E:2E:C3:D0:48=/etc/Wireless/RT2860STA/RT2860STA1.dat
+01MAC00:40:F4:FF:AA:40=/etc/Wireless/RT2860STA/RT2860STA2.dat
+02MAC00:0C:43:10:11:5C=/etc/Wireless/RT2860STA/RT2860STA3.dat
+
+00CARDTYPEbgn=/etc/Wireless/RT2860STA/RT2860STA1.dat
+01CARDTYPEbgn=/etc/Wireless/RT2860STA/RT2860STA2.dat
+02CARDTYPEabgn=/etc/Wireless/RT2860STA/RT2860STA3.dat
+
+

le-pregao-712010/pacote/usr/src/lepregao712010-2.3.0.0-Alpha-v2/chips/rt30xx.c

+/*
+ *************************************************************************
+ * Ralink Tech Inc.
+ * 5F., No.36, Taiyuan St., Jhubei City,
+ * Hsinchu County 302,
+ * Taiwan, R.O.C.
+ *
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify  * 
+ * it under the terms of the GNU General Public License as published by  * 
+ * the Free Software Foundation; either version 2 of the License, or     * 
+ * (at your option) any later version.                                   * 
+ *                                                                       * 
+ * This program is distributed in the hope that it will be useful,       * 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        * 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         * 
+ * GNU General Public License for more details.                          * 
+ *                                                                       * 
+ * You should have received a copy of the GNU General Public License     * 
+ * along with this program; if not, write to the                         * 
+ * Free Software Foundation, Inc.,                                       * 
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             * 
+ *                                                                       * 
+ *************************************************************************
+
+	Module Name:
+	rt2880.c
+
+	Abstract:
+	Specific funcitons and variables for RT30xx.
+
+	Revision History:
+	Who         When          What
+	--------    ----------    ----------------------------------------------
+*/
+
+
+#ifdef RT30xx
+
+
+#ifndef RTMP_RF_RW_SUPPORT
+#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
+#endif // RTMP_RF_RW_SUPPORT //
+
+#include "rt_config.h"
+
+
+//
+// RF register initialization set
+//
+REG_PAIR   RT30xx_RFRegTable[] = {
+        {RF_R04,          0x40},
+        {RF_R05,          0x03},
+        {RF_R06,          0x02},
+        {RF_R07,          0x70},      
+        {RF_R09,          0x0F},
+        {RF_R10,          0x41},
+        {RF_R11,          0x21},
+        {RF_R12,          0x7B},
+        {RF_R14,          0x90},
+        {RF_R15,          0x58},
+        {RF_R16,          0xB3},
+        {RF_R17,          0x92},
+        {RF_R18,          0x2C},
+        {RF_R19,          0x02},
+        {RF_R20,          0xBA},
+        {RF_R21,          0xDB},
+        {RF_R24,          0x16},      
+        {RF_R25,          0x01},
+        {RF_R29,          0x1F},
+};
+
+UCHAR NUM_RF_REG_PARMS = (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR));
+
+
+// Antenna divesity use GPIO3 and EESK pin for control
+// Antenna and EEPROM access are both using EESK pin,
+// Therefor we should avoid accessing EESK at the same time
+// Then restore antenna after EEPROM access
+// The original name of this function is AsicSetRxAnt(), now change to 
+//VOID AsicSetRxAnt(
+VOID RT30xxSetRxAnt(
+	IN PRTMP_ADAPTER	pAd,
+	IN UCHAR			Ant)
+{
+	UINT32	Value;
+#ifdef RTMP_MAC_PCI
+	UINT32	x;
+#endif // RTMP_MAC_PCI //
+
+	if ((pAd->EepromAccess) ||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+	{
+		return;
+	}
+
+	// the antenna selection is through firmware and MAC register(GPIO3)
+	if (Ant == 0)
+	{
+		// Main antenna
+#ifdef RTMP_MAC_PCI
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x |= (EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+#else
+		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0);
+#endif // RTMP_MAC_PCI //
+
+		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+		Value &= ~(0x0808);
+		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
+	}
+	else
+	{
+		// Aux antenna
+#ifdef RTMP_MAC_PCI
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x &= ~(EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+#else
+		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0);
+#endif // RTMP_MAC_PCI //
+		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+		Value &= ~(0x0808);
+		Value |= 0x08;
+		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
+	}
+}
+
+
+/*
+	========================================================================
+
+	Routine Description:
+		For RF filter calibration purpose
+
+	Arguments:
+		pAd                          Pointer to our adapter
+
+	Return Value:
+		None
+
+	IRQL = PASSIVE_LEVEL
+
+	========================================================================
+*/
+VOID RTMPFilterCalibration(
+	IN PRTMP_ADAPTER pAd)
+{
+	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue=0;
+	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
+	UCHAR	RF_R24_Value = 0;
+
+	// Give bbp filter initial value
+	pAd->Mlme.CaliBW20RfR24 = 0x1F;
+	pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
+
+	do 
+	{
+		if (loop == 1)	//BandWidth = 40 MHz
+		{
+			// Write 0x27 to RF_R24 to program filter
+			RT30xxReadRFRegister(pAd, RF_R24, (PUCHAR)(&RF_R24_Value));
+			RF_R24_Value = (RF_R24_Value & 0xC0) | 0x27; // <bit 5>:tx_h20M<bit 5> and <bit 4:0>:tx_agc_fc<bit 4:0>
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			if (IS_RT3071(pAd) || IS_RT3572(pAd)|| IS_RT3390(pAd))
+				FilterTarget = 0x15;
+			else
+				FilterTarget = 0x19;
+
+			// when calibrate BW40, BBP mask must set to BW40.
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+			BBPValue&= (~0x18);
+			BBPValue|= (0x10);
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+			// set to BW40
+			RT30xxReadRFRegister(pAd, RF_R31, &value);
+			value |= 0x20;
+			RT30xxWriteRFRegister(pAd, RF_R31, value);
+		}
+		else			//BandWidth = 20 MHz
+		{
+			// Write 0x07 to RF_R24 to program filter
+			RT30xxReadRFRegister(pAd, RF_R24, (PUCHAR)(&RF_R24_Value));
+			RF_R24_Value = (RF_R24_Value & 0xC0) | 0x07; // <bit 5>:tx_h20M<bit 5> and <bit 4:0>:tx_agc_fc<bit 4:0>
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			if (IS_RT3071(pAd) || IS_RT3572(pAd)|| IS_RT3390(pAd))
+				FilterTarget = 0x13;
+			else
+				FilterTarget = 0x16;
+
+			// set to BW20
+			RT30xxReadRFRegister(pAd, RF_R31, &value);
+			value &= (~0x20);
+			RT30xxWriteRFRegister(pAd, RF_R31, value);
+		}
+
+		// Write 0x01 to RF_R22 to enable baseband loopback mode
+		RT30xxReadRFRegister(pAd, RF_R22, &value);
+		value |= 0x01;
+		RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+		do
+		{
+			if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))				
+				return;
+			
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+			RTMPusecDelay(1000);
+			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+			R55x = value & 0xFF;
+
+		} while ((ReTry++ < 100) && (R55x == 0));
+		
+		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);
+
+		while(TRUE)
+		{
+			if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))				
+				return;
+			
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+			//We need to wait for calibration
+			RTMPusecDelay(1000);
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+			value &= 0xFF;
+			if ((R55x - value) < FilterTarget)
+			{
+				RF_R24_Value ++;
+			}
+			else if ((R55x - value) == FilterTarget)
+			{
+				RF_R24_Value ++;
+				count ++;
+			}
+			else
+			{
+				break;
+			}
+
+			// prevent infinite loop cause driver hang.
+			if (loopcnt++ > 100)
+			{
+				DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
+				break;
+			}
+
+			// Write RF_R24 to program filter
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+		}
+
+		if (count > 0)
+		{
+			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
+		}
+
+		// Store for future usage
+		if (loopcnt < 100)
+		{
+			if (loop++ == 0)
+			{
+				//BandWidth = 20 MHz
+				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
+			}
+			else
+			{
+				//BandWidth = 40 MHz
+				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
+				break;
+			}
+		}
+		else 
+			break;
+
+		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+
+		// reset count
+		count = 0;
+	} while(TRUE);
+
+	//
+	// Set back to initial state
+	//
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+	RT30xxReadRFRegister(pAd, RF_R22, &value);
+	value &= ~(0x01);
+	RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+	// set BBP back to BW20
+	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+	BBPValue&= (~0x18);
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+	DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
+}
+
+
+// add by johnli, RF power sequence setup
+/*
+	==========================================================================
+	Description:
+
+	Load RF normal operation-mode setup
+	
+	==========================================================================
+ */
+VOID RT30xxLoadRFNormalModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+
+	// RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue = (RFValue & (~0x0C)) | 0x31;
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// TX_LO2_en, RF R15 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R15, RFValue);
+
+	/* move to NICInitRT30xxRFRegisters
+	// TX_LO1_en, RF R17 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
+	RFValue &= (~0x08);
+	// to fix rx long range issue
+	if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
+	{
+		RFValue |= 0x20;
+	}
+	// set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h
+	if (pAd->TxMixerGain24G >= 2)
+	{
+		RFValue &= (~0x7);  // clean bit [2:0]
+		RFValue |= pAd->TxMixerGain24G;
+	}
+	RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
+	*/
+
+	// RX_LO1_en, RF R20 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R20, RFValue);
+
+	// RX_LO2_en, RF R21 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	/* add by johnli, reset RF_R27 when interface down & up to fix throughput problem*/
+	// LDORF_VC, RF R27 register Bit 2 to 0
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	// TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). 
+	// Raising RF voltage is no longer needed for RT3070(F)
+	if (IS_RT3090(pAd))	// RT309x and RT3071/72
+	{
+		if ((pAd->MACVersion & 0xffff) < 0x0211)
+			RFValue = (RFValue & (~0x77)) | 0x3;
+		else
+			RFValue = (RFValue & (~0x77));
+		RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+	}
+	/* end johnli */
+}
+
+/*
+	==========================================================================
+	Description:
+
+	Load RF sleep-mode setup
+	
+	==========================================================================
+ */
+VOID RT30xxLoadRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+	UINT32 MACValue;
+
+#ifdef RT35xx
+	if(IS_RT3572(pAd))
+		RT30xxWriteRFRegister(pAd, RF_R08, 0x00);
+#endif // RT35xx //
+
+	if(!IS_RT3572(pAd))
+	{
+		// RF_BLOCK_en. RF R1 register Bit 0 to 0
+		RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+		RFValue &= (~0x01);
+		RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+		// VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
+		RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+		RFValue &= (~0x30);
+		RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+		// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
+		RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+		RFValue &= (~0x0E);
+		RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+		// RX_CTB_en, RF R21 register Bit 7 to 0
+		RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+		RFValue &= (~0x80);
+		RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+	}
+
+	if (IS_RT3090(pAd) ||	// IS_RT3090 including RT309x and RT3071/72
+		IS_RT3572(pAd) ||
+		(IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201)))
+	{
+		if (!IS_RT3572(pAd))
+		{
+			RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+			RFValue |= 0x77;
+			RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+		}
+
+		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+		MACValue |= 0x1D000000;
+		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+	}
+}
+
+/*
+	==========================================================================
+	Description:
+
+	Reverse RF sleep-mode setup
+	
+	==========================================================================
+ */
+VOID RT30xxReverseRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+	UINT32 MACValue;
+
+	if(!IS_RT3572(pAd))
+	{
+		// RF_BLOCK_en, RF R1 register Bit 0 to 1
+		RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+		RFValue |= 0x01;
+		RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+		// VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
+		RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+		RFValue |= 0x30;
+		RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+		// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
+		RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+		RFValue |= 0x0E;
+		RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+		// RX_CTB_en, RF R21 register Bit 7 to 1
+		RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+		RFValue |= 0x80;
+		RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+	}
+
+	if (IS_RT3090(pAd) ||	// IS_RT3090 including RT309x and RT3071/72
+		IS_RT3572(pAd) ||
+		IS_RT3390(pAd) ||
+		(IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201)))
+	{
+		if (!IS_RT3572(pAd))
+		{
+			RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+			if ((pAd->MACVersion & 0xffff) < 0x0211)
+				RFValue = (RFValue & (~0x77)) | 0x3;
+			else
+				RFValue = (RFValue & (~0x77));
+			RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+		}
+
+		// RT3071 version E has fixed this issue
+		if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+		{
+			// patch tx EVM issue temporarily
+			RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+			MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
+			RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+		}
+		else
+		{
+			RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+			MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000);
+			RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+		}
+	}
+
+	if(IS_RT3572(pAd))
+		RT30xxWriteRFRegister(pAd, RF_R08, 0x80);
+}
+// end johnli
+
+VOID RT30xxHaltAction(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UINT32		TxPinCfg = 0x00050F0F;
+
+	//
+	// Turn off LNA_PE or TRSW_POL
+	//
+	if (IS_RT3070(pAd) || IS_RT3071(pAd) || IS_RT3572(pAd))
+	{
+		if ((IS_RT3071(pAd) || IS_RT3572(pAd))
+#ifdef RTMP_EFUSE_SUPPORT
+			&& (pAd->bUseEfuse)
+#endif // RTMP_EFUSE_SUPPORT //
+			)
+		{
+			TxPinCfg &= 0xFFFBF0F0; // bit18 off
+		}
+		else
+		{
+			TxPinCfg &= 0xFFFFF0F0;
+		}
+#ifdef RT35xx
+		if (IS_RT3572(pAd))
+			RT30xxWriteRFRegister(pAd, RF_R08, (UCHAR)0x00);
+#endif // RT35xx //
+
+		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);   
+	}
+}
+
+#endif // RT30xx //
+